Connecting A Dvd Player With Component Video Output Connectors - Sony KP-53XBR200 Operating Instructions Manual

Connecting a DVD Player with
component video output
connectors
1
Using AUDIO connectors, connect AUDIO
R and L of the LINE OUT on your DVD
Player to AUDIO R and L on the VIDEO 5
IN panel at the rear of your projection TV.
2
Using three yellow VIDEO connectors,
connect Y, C , and C on the
B R
COMPONENT VIDEO OUT on your DVD
Player to Y, C , and C on the VIDEO 5 IN
B R
panel at the rear of your projection TV.
Notes:
• Some DVD Player terminals may be
labeled differently. If so, connect as
follows:
Connect To
Y (green) Y
C (blue) C , B-Y or P
B b
C (red) C , R-Y or P
R r
• Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust NR
in the ADVANCED VIDEO menu. (see
"NR" on page 37)
(Rear of projection TV)
B
R
Disconnect all power sources before making any connections.
IN OUT
VIDEO 1 VIDEO 3 VIDEO 4 VIDEO 5 SELECT
S-LINK/ S-LINK/
CONTROL S CONTROL S
OUT IN
S VIDEO
VHF/UHF
Y
VIDEO VIDEO
C
B
L
L
(MONO)
AUDIO AUDIO
C
R
R R
AUDIO-L (white)
AUDIO-R (red)
RK-74A (not supplied)
VMC-10HG (not supplied)
AUX
2
LINE OUT S VIDEO OUT COMPONENT VIDEO OUT
R–AUDIO 1–L VIDEO Y
1
Connect your DVD Player directly to
your projection TV. Connecting the
DVD Player through other video
equipment will cause unwanted
picture noise.
DVD
S-LINK DIGITAL OUT
B-Y R-Y OPTICAL COAXIAL
15