Pioneer XV-HTD330 Service Manual page 97

5
QQ
3 7 63 1515 0
Error Name
SPINDLE ERROR (0 x 6∗)
Spindle on error
Spindle off error
Spindle lost error
Spindle CAV error
Spindle CLV error
SPINDLE TIMEOUT (0 x 7∗)
Spindle on timeout
Spindle off timeout
Spindle lost timeout
Spindle CAV timeout
Spindle CLV timeout
ACQUISITION ERROR (0 x 8∗)
PLL lost error
ACQUISITION TIMEOUT (0 x 9∗)
PLL lost timeout
DECODER ERROR (0 x a∗)
ID lost error
DECODER TIMEOUT (0 x b∗)
ID lost timeout
DEVICE ERROR (0 x d∗)
TE
L 13942296513
SRAM error
FAILSAFE (0 x e∗)
Unexpected error
www
.
5
http://www.xiaoyu163.com
6
No. Causes
0 x 61 Spindle on could not be completed
0 x 62 Spindle off could not be completed
0 x 63 Spindle lost control
0 x 64 CAV on could not be completed
0 x 65 CLV on could not be completed
0 x 71 Did timeout at spindle on
0 x 72 Did timeout at spindle stop
0 x 73 Did timeout at spindle backup
0 x 74 Did timeout at CAV on
0 x 75 Did timeout at CLV on
0 x 83 PLL is lost
0 x 93 Did timeout at PLL backup
0 x a3 ID is not readable
0xb3 Did timeout at ID backup
0 x d1 Cannot access SRAM
0 x e1 Unexpected error
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Check Item
Are not there a dirt or a scratch in
the Disc?
Is FG output from the driver?
Is spindle rotating?
Is FG output from the driver?
Is the PDM output from Front End?
Are not there a dirt or a scratch in
the Disc?
Are not there a dirt or a scratch in
the Disc?
Are not there a dirt or a scratch in
the Disc?
Are not there a dirt or a scratch in
the Disc?
Q Q
3 6 7 1 3 1 5
Power supply of SRAM
Is not bus line short-circuiting?
co
.
XV-HTD330
7
9 4 2 8
Possibility of Trouble
1. Spindle motor
2. Spindle driver
1. Spindle motor
2. Spindle driver
3. Front End IC
1. Pickup
2. Front End IC
1. Pickup
2. Front End IC
1. Pickup
2. Front End IC
1. Pickup
2. Front End IC
1. SRAM
0 5 8 2 9 9 4 2 8
2. Front End IC
3. Front End-SRAM bus line
1. software runaway
3. Software bug
m
8
9 9
Remarks
A
B
C
9 9
D
E
F
97
8