Infrared; Packet Data - Nokia 6270 User Manual

Infrared

You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the
device with which you want to establish a connection must be IrDA compliant. You can send or receive data to
or from a compatible phone or data device (for example, a computer) through the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser
product.
When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
To activate the IR port of your phone, select
To deactivate the IR connection, select
Deactivate infrared?, select Yes.
If data transfer is not started within 2 minutes after the activation of the IR port, the connection is canceled
and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your phone is ready to send or receive
data through its IR port.
When blinks, your phone is trying to connect to the other device, or a connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data
over an Internet protocol (IP)based network. GPRS is a data bearer that enables wireless access to data
networks such as the Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability
of (E)GPRS and data transfer speed, contact your network operator or service provider.
Menu > Settings
Menu > Settings
Copyright © 2005 Nokia. All rights reserved.
> Connectivity > Infrared.
> Connectivity > Infrared. When the phone displays
72