■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or
danger.
Press and hold the power key as shown.
If the phone asks for a PIN or UPIN code, enter the code, and select OK.
Plug and play service
When you switch on your phone for the first time, and the phone is in the standby mode, you
may be asked to get the configuration settings from your service provider (network service).
Confirm or decline the query. See
Configuration settings service
■ Open the keypad
To open the keypad, slide the phone as shown.
Connect to serv. support
p. 17.
Copyright © 2005 Nokia. All rights reserved.
in
Configuration
p.
78
and
24