Table of Contents
Advertisement
Installation
1.First read carefully the relevant instructions in Safety and precautions .
2.Place the TV set in a room where there is no direct sunlight on it. Any light reflecting from the screen will cause fatigue
of your eyes.
3.Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height.
4.Keep a space of 10cm or over between the TV set and wall for good ventilation.
5.Never put the TV set in a place with excessive temperature or moisture, to avoid damage or failure of its components.
Automatic demagnetizing
A color TV set is likely to be affected by magnetic fields causing color distortion. If the TV set is moved while on, turned
or affected by a magnetic object nearby, turn off the power supply and wait for at least 1 hour before turn it on. That is to
ensure that the automatic demagnetizing circuit will operate eliminating adverse effects of magnetism on color purity.
Antenna connection
For good reception use an outdoor antenna. The recommended type and location of antennas varies between different areas.
Notes:
1.Connect the outdoor antenna as shown above.
2.It is suggested to use 75 coaxial cable to eliminate
interference or noise.
3.The cable must not be tied together with supply cords.
Preparing the remote controller
1 Remove the battery cover of remote controller.
2 Load two AAA type batteries into the chamber observing the correct polarity.
Precautions operating the remote controller
1.Direct the remote controller to the infrared receiver window of the TV set.
2.Do not press the keys on the remote controller continuously.
3.If the remote controller will not be used for long time or if the batteries have
depleted, please remove them to prevent leaking.
4.Never throw batteries into fire and properly dispose of the used batteries.
5.Take care not to drop, damp or dismantle the remote controller.
Parallel flat cable
(300 )
Impedance adaptor
(300 -75 )
Antenna input
Hide quick links:
Advertisement
Table of Contents
