Ultra HD Smart LED TV LEH55K7UDT LEH65K7UDT USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ www.teac.com.au Trademark of TEAC Corporation JAPAN...
Page 2
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call.
Page 3
In-Home service call fee. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.
Contents Introduction................2 Warning..................3 Caution..................4 Stand Assembly.................6 Wall Mounting Installation Guidelines........7 Main Unit Description..............8 Remote Control................10 Main Menu................11 Main Menu Operation............12 Media..................33 Specifications................35 Trouble Shooting..............36...
Introduction Read this manual carefully and keep Thank you very much for your purchase of our LED TV. it handy for ready reference. INSTALLATION Locate the room where direct light does not strike the screen. Total darkness or a TV in a reflection on the picture screen can cause eyestrain.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution Caution High voltages are used in the operation of this product. Do not Refer servicing open the product's casing. to qualified service personnel . Caution To prevent fire or electrical shock hazard, do not expose the main unit to do not place objects rain or moisture filled with liquids, such as vases, on the apparatus.
Page 8
Caution Caution Never stand on, lean on, push suddenly the product or its stand. You should Pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.
Stand Assembly 1. IMPORTANT: Place a soft cloth on a table and place the TV face down on the cloth. This is to prevent the panel from being cracked or damaged. Attach the stand base plate to the stand pole by firmly tightening the supplied 4pcs M4x10 screws.
Wall Mounting Installation Guidelines Compatible wall-mount size: VESA 600 x 400mm Screw size for wall mounting: M6 ( The depth of the wall-mount hole is 19mm, please choose a screw of the appropriate length) Use the four screws to fix the TV onto a wall mounting bracket ( not included) via the four VESA standard holes on the back of the television.
Main Unit Description Control Panel Button Function VOL+ : Volume up. VOL- : Volume down. CH+: TV channel up. CH- : TV channel down. MENU : Press to select the main menu. SOURCE : Select the input signal. POWER : Turn the TV on or off. TV Terminal Connections 1.
Page 12
Optional Configuration as below: Connect the USB to the USB jack on the set. NOTE ting with USB jack (must more than 2 GB). The partitions of document. The max FAT document is 4GB and the max FAT32 document is 2TB.
Remote control : Press this button to Turn the TV on or off. : Press this button to mute or restore sound. INPUT: Press to change signal source. AUDIO: Press to select the DTV audio. INPUT AUDIO PMODE SMODE (Used for models with DTV function only) PMODE: Select picture mode.
Main Menu Select Input Source INPUT Press button to display the input source list. Press button to select input source, then press button to enter. EXIT Press button to quit. Options: DTV, Analogue TV, Composite/AV , Component/YPbPr, HDMI 1, HDMI 2,HDMI 3,HDMI 4 First Time Installation Connect an RF cable from the TVs input called “RF-In”...
Main Menu Operation Main Menu MENU Press button to display the main menu. Pres utton to select the item you want to adjust in the main menu. (Options: PICTURE, SOUND, CHANNEL, LOCK, TIME, NETWORK, SETTING, APPLICATION.) Picture Menu Press MENU button to display the main menu. Press button to select PICTURE in the main menu.
Picture Mode button to select Picture Mode, then press OK button to enter sub-menu. Press (Options: Standard, Dynamic, Mild, Personal, Economy) For your convenience to watch the actual effect, a small bar will be displayed as below. Press button to select option, then press button to adjust.
Sound Menu Press MENU button to display the main menu. Press button to select SOUND in the main menu. Sound Mode Select a sound mode to achieve ideal sound. Press button to select Sound Mode, then press Enter button to enter sub- menu. Press button to select.
There are two different channel menu in this part: Channel menu under Analogue TV input source, and channel menu under DTV input source. Next, we will introduce them one by one. Channel Menu(Analogue TV) Press MENU button to display the main menu. Press input to select the input source as <Analogue TV>. utton to select CHANNEL in the main menu.
The searched TV programme The searched DTV programme Radio The searched Radio programme Data The searched Data Analogue Manual Tuning Tuning the analogue channel manually. Enter Press button to select Analogue Manual Tuning, then press button to enter sub-menu. Storage To 1 Store the searched channel to 1(you can adjust the channel number by...
Channel Edit Edit the programme. Press button to select Channel Edit. Press button to enter sub-menu. Press to highlight the channel you want to select. Delete the channel from your favorite list Rename the channel (Only available for ATV) Move the selected channel Skip the selected channel Set the selected channel as favorite Press up and down to select channel...
Page 21
Press MENU button to display the main menu. Press input to select the input source as <DTV>. Channel Menu(DTV) Press button to display the main menu. Press input to select the input source as <DTV>. utton to select CHANNEL in the main menu. Pres (Options: Auto Tuning, Analogue Manual Tuning, Digital Manual Tuning, Channel Edit, Signal Information , Recorded List, Schedule List , OAD.
Page 22
Auto Tuning Tuning the channel automatically. button to select Auto Tuning, then press Enter button to enter Press sub-menu. utton to select the Country, then press Enter button to start Auto Tuning. Pres Tuning Mode Select the tuning mode. (Options: ATV, DTV, ATV+DTV) Country Select the country Operator...
Digital Manual Tuning Tuning the digital channel manually. Press button to select Digital Manual Tuning, then press button to enter sub-menu. Frequency 394 MHZ Channel frequency Symbol Auto Adjust the symbol automatically Modulation Auto Adjust the modulation automatically Search Start searching Strength Channel signal strength Quality...
Recorded List button to select Recorded List, then press Enter button to enter sub-menu. Press Press to view the recorded list. Delete the program in Record list. Sort the recorded programs by channel number. Press Index button to change the LCN, channel, program order. Schedule List button to select Schedule List, press the Enter button to view the detailed information.
Lock Menu Press MENU button to display the main menu. utton to select Lock in the main menu. Pres button to select the option that you want to adjust in the Lock menu. 1. Press 2. Press Ente button to adjust. 3.
Lock the selected channel Parental Guidance Some programmes may not be suitable for children, through Parental Guidance set-up ,parents can block unsuitable shows automatically. Press button to select Parental Guidance. Press button to select block M, MA, AV, R, G, PG, and above, block ALL, NO block. Key Lock button to select Key Lock , then press Enter button or Press...
Time Menu Press MENU button to display the main menu. button to select Time in the main menu. Press 1. Press button to select the option that you want to adjust in the Time menu. 2. Press Enter button to adjust. Clock Press button to select Clock.
Network Menu Press MENU button to display the main menu. Pres utton to select Network in the main menu. 1. Press button to select the option that you want to adjust in the Network menu. 2. Press Enter button to adjust. 3.
Network Info Press button to select Network Info. Press Enter button to view the WIFI network information. Network Test Press button to select Network Test. Press Enter button to test the WIFI network.
Page 30
Cable Configuration Press button to select Cable Configuration. Press Enter button to view set IP, Netmas k,Gateway, and DNS. IP Config Press button to select IP Config. Press Enter button to set the IP Configuration.
Page 31
Network Info Press button to select Network Info. Press Enter button to view the WIFI network information. Network Test Press button to select Network Test. Press Enter button to test the WIFI network.
Setting Menu to select Setting in the main menu. Press MENU button to display the main menu, press Language Press button to select Language. Press to select the display language. Audio Language Press button to select Audio Language. Press to select the Audio language. Audio Language2 Press button to select Audio Language2.
Software Update(USB) Update the software of the TV system. Press button to select Software Update, then press Enter button to confirm. Tips:A USB device with updated Reset TV Reset the settings of the TV set. , then press Enter button to confirm. Press button to select Reset TV...
Page 34
Use PVR function to record programs. USB memory device is required for recording. In DTV mode, press the button, the record frame OSD will pop up and start recording. After 10 seconds, the record frame OSD is hidden and the record icon appears on the left top. Press the button, the record frame OSD appears.
Page 35
Application Press MENU button to display the main menu. Press button to select Application. Applications Press button to select Applications. button to select the application you want to view, then press enter to enter.. Press...
Media Multimedia Press Menu button on the remote to enter the main menu. S timedia using buttons and press Enter button to enter. ant to adjust in the main Media menu. Pres utton to se e t the optio , then press Enter button to enter. Press button to return to the previous menu and exit menu to quit.
Page 37
Music ress Enter Pres Press Photo Press File ress Enter Pres e r g .
Troubleshooting Before consulting service personnel, check the following chart for possible solutions. PROBLEM SOLUTION Make sure the power cord is plugged in. TV will not turn on The batteries in the remote control may be the batteries. Exhausted; replace Check the cable between TV and antenna/ external AV device.
Page 40
In the event of a product failure within the warranty period, please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday - 8.30AM to 5PM AEST *Please have your purchase receipt and the product’s serial number ready For other enquiries and support please visit www.teac.com.au...