Keylock Code (Menu 4-3-2); Change Keylock Code (Menu 4-3-3) - Nokia 6250 User Manual

1. Select On if you want to select the automatic keypad lock.
2. Give the time entry in minutes and seconds after
The default is 01:00. The maximum time entry for the delay is 60 minutes and the minimum entry
10 seconds.
The automatic keyguard activates if:
• phone is in standby mode and a user selectable time delay expires.

Keylock code (Menu 4-3-2)

You can use keylock code to prevent the unauthorised use of your phone. The default code is 0000.
Note: Before activating the keylock code make sure that the PIN code request is also set on.
If you set the keylock code by pressing
need to enter the required code in the standby mode to unlock the keypad.
Note: To unlock your keypad, press in standby mode
code. If you enter an incorrect keylock code five times in succession, the phone prompts you to enter
the PIN code instead. After entering the PIN code, you can change your keylock code (Menu 4-3-3).

Change keylock code (Menu 4-3-3)

If you want to change the old or default code to a new one, use this
submenu.
1. Enter the new four-digit keylock code and press OK.
2. Verify the given code.
Note: Despite the keylock code you can answer a call and use other keys as
usual during the call. The keypad lock is reactivated once the call is finished.
82 ©2000 Nokia Mobile Phones. All rights reserved.
Delay time
On this is confirmed with the note
Unlock
appears on the display.
Keylock code
and then key in the four-digit keylock
activated. You