Installing The Heatsink Fan Cover; Removing The Heatsink Assembly - Dell Vostro 3250 Owner's Manual

Figure 9.

Installing the Heatsink Fan Cover

1. Place the heatsink assembly in the slot by aligning with the screw holes.
2. Tighten the screws to secure the heatsink assembly to the system board.
3. Connect the heatsink-assembly cable to the system board.
4. Install:
a. optical drive
b. hard-drive assembly
c. front bezel
d. cover
5. Follow the procedures in

Removing the Heatsink Assembly

1. Follow the procedures in
2. Remove:
a. cover
b. front bezel
c. hard-drive assembly
d. optical drive
e. heatsink-fan cover
3. Follow the steps to remove the heatsink assembly:
a. Disconnect the heatsink assembly cable from the system board [1].
b. Remove the screws to loosen the processor fan and the heatsink [2].
c. Lift up the heatsink and remove it from the chassis [3].
14
After Working Inside Your
Before Working Inside Your
Computer.
Computer.