Installing The Expansion Card; Removing The System Board - Dell Vostro 3250 Owner's Manual

Installing the Expansion Card

1. Insert the expansion card in its connector on the system board.
2. Secure the expansion card by pushing the card-retention latch until it snaps into place.
3. Push the metal tab until it snaps in place to secure the expansion card.
4. Close the front-bezel door
5. Install:
a. front bezel
b. cover
6. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove:
a. cover
b. front bezel
c. hard-drive assembly
d. optical drive
e. heatsink-fan cover
f. heatsink
g. memory
h. coin-cell battery
i. WLAN card
j. expansion cards
3. Disconnect the cables from the system board:
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
21