Sending A Touch Tone String - Nokia 6185 Owner's Manual

You can store a whole digit sequence in your phone book
and send it as touch tones for frequently-used strings of
numbers.

Sending a touch tone string

Make sure Menu 4-2-3-1 (Settings - Phone settings -
Touch tones - Manual touch tones) is not set to Off.
During a call,
Press Options
1.
Scroll to Touch tones and press OK
2.
Enter touch tone string or recall string from the
3.
phone book and press OK
Note: Use caution when sending confidential information over the
air when using DTMF tones in analog mode.
Storing touch tone strings with phone numbers
Enter the phone number (e.g. your office voice
1.
mailbox)
Press
2.
Enter the touch tone string (e.g. voice mailbox
3.
password)
Store the number as you normally would
4.
Note: See "Special Characters (for storing and calling numbers)"
on page 38 for details on "p" and "w" characters.
When you dial this number, your phone first dials the
phone number, then waits (because of the "w" character)
for you to press the soft key
sends your password.
If you include a "p" character instead of a "w", your phone
pauses for 2.5 seconds, then automatically sends your
password as touch tones.
Linking phone numbers with touch tone strings
This feature allows you to store a phone number in one
phone book location and link it to another phone book
location that contains a touch tone string.
(p) or (w)
71
Send. Your phone then