Touch Tone Length; Touch Tones; Storing Touch Tone Strings; Sending A Touch Tone String - Nokia 6185 User Manual

played on the screen for 3 seconds, the call will be
placed.
Note: If more than one number is on the display, the numbers are dis-
played in a list. Simply select the phone number you want to call and
press . If no numbers are found, your phone will display No num-
ber found.
When your phone's memory is full
When you have an incoming text message and your phone's
memory is full, one or more messages, of lowest priority, will
automatically be deleted in order to receive the new text
message.
If the message memory is still full, your phone will display No
space: read messages You can clear this notification by
.
pressing OK.
Note: Messages are usually deleted from your Inbox. An incoming
emergency message may delete messages from your Saved folder.

Touch tone length

This feature determines the length of each touch tone when
they are sent automatically.
Short sets the tone length to .1 second. Long sets the tone
length to .5 second.
You can set the touch tone length by pressing Menu
4 2 3 2 (Settings - Phone settings - Touch tones - Touch
tone length).

Touch tones

Your phone can generate various sounds, called touch tones,
when the keys are pressed. These are also known as DTMF
tones.
Touch tones can be used for many automated, over-the-
phone services such as checking bank balances, airline arrival
and departure times, and using voice mailbox options. Touch
tones can be sent only when a call is active.
72
Final version 2/15/99

Storing touch tone strings

Store touch tone strings the same way you store phone num-
bers ( ).
see page 54
You can store a whole digit sequence in your phone book and
send it as touch tones for frequently-used strings of
numbers.

Sending a touch tone string

Make sure Menu 4-2-3-1 (Settings - Phone settings -
Touch tones - Manual touch tones) is not set to Off. During
a call,
Press Options
1.
Scroll to Touch tones and press OK
2.
Enter touch tone string or recall string from the phone
3.
book and press OK
Note: Use caution when sending confidential information over the air
when using DTMF tones in analog mode.
Storing touch tone strings with phone numbers
Enter the phone number (e.g. your office voice mailbox)
1.
Press (p) or (w)
2.
Enter the touch tone string (e.g. voice mailbox pass-
3.
word)
Store the number as you normally would
4.
Note: See "Special Characters (for storing & calling numbers)" on
page 39 for details on "p" and "w" characters.
When you dial this number, your phone first dials the phone
number, then waits (because of the "w" character) for you to
press Send. Your phone then sends your password.
If you include a "p" character instead of a "w", your phone
pauses for 2.5 seconds, then automatically sends your pass-
word as touch tones.
Linking phone numbers with touch tone strings
This feature allows you to store a phone number in one
73
Final version 2/15/99