W
Use
4.
If you select Automatic, your phone's lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
Listen to voice messages
This feature allows you to access your voice messages.
See "Voice messages" on page 73 for complete details.
Lock code
You'll need the lock code to activate and deactivate
Phone Lock (
default lock code is 1234. If you enter an incorrect lock
code five times in a row,
the security code (
Changing your lock code
In a lock code, only numeric characters are accepted.
Enter Menu 4-3-2-3 (Settings - Security settings -
1.
Access codes - Change lock code)
Enter lock code at Enter lock code: and press OK
2.
Enter new lock code, press OK
3.
Verify new lock code, press OK
4.
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See "Touch tone length" on page 70 for details.
to scroll through your choices and press OK
), or to change your lock code. The
see page 53
see page 62
phone will prompt you for
your
).
44