2
Paper Handling
Load Paper
Load Paper in the Paper
Tray
• If the Check Size setting is set to On and
you pull the paper tray out of the
machine, a message appears on the
LCD asking if you want to change the
paper size. Change the paper size and
paper type settings if needed, following
the on-screen instructions.
• When you load a different size and type
of paper in the tray, you must change the
Paper Size and Paper Type settings in
the machine or on your computer, also.
• When you use thick paper, open the
back cover (face up output tray) to let the
printed paper exit onto the face up
output tray.
1
Pull the paper tray completely out of the
machine.
2
Press and slide the paper guides to fit
the paper.
Press the green release levers to slide
the paper guides.
3
Fan the stack of paper well.
4
Load paper in the paper tray with the
printing surface face down.
When you use Letterhead or Preprinted
paper, load the paper in the correct
orientation as shown in the illustrations.
Paper Orientation for
Letterhead and Preprinted
Paper
For 1-sided printing
• face down
• top edge toward the front of the
paper tray
8