Troubleshooting - Polaris BRUTUS Owner's Manual

TROUBLESHOOTING

WARNING!
Instructions are necessary before operating or servicing machine. Read and understand the Owner's Manual, Operator's Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or service. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death
Chart
PROBLEM
Poor cutting.
Blades will not rotate.
Vibration.
MAINTENANCE INTERVAL
Item
Attachment Frame Inspection
Discharge Chute Inspection
Blade Inspection
Adjust Belt
Grease PTO Shaft
Check Gearbox Lube
Replace Gearbox Lube
Perform these procedures more often for vehicles subjected to severe use.
30
CAUSE
Travel speed too fast.
Damaged gearbox.
Low blade RPM.
Blade belt slipping.
Blades dull.
Worn or broken blade belt.
PTO driveline disconnected.
Build up of material on the bottom of the mower
deck.
Maintenance
Interval
(whichever
comes first)
Hours Calendar
- Pre-Ride
- Pre-Ride
- Pre-Ride
10 H
10 H
50 H
50 H
Reduce travel speed.
Repair or replace gearbox.
Increase RPM.
Adjust belt to correct tension.
Sharpen or replace the blades.
Replace belt.
Connect PTO driveline.
Clean the bottom of the mower deck.
Remarks
Inspect for cracks or damage.
Inspect for cracks or damage.
Inspect for excess wear, cracks, damage and loose hardware.
Adjust belt as needed.
Grease PTO shaft and u-joints.
Check fluid level, add as needed.
Drain and replace fluid (Approx. 10.2 fl oz (0.3 L) of Premium
Angle Drive Fluid
.
CORRECTION