Installing The Mower - Polaris BRUTUS Owner's Manual

Installation

Installing The Mower

Always inspect the utility vehicle's mounting frame and attach-
ment front mounting frame before installation. See the BRUTUS
owner's manual.
WARNING!
Warnings on the machine and in the manuals are for your safety. Failure
to obey warnings can cause serious injury or death.
WARNING!
Keep fingers and hands out of pinch points when installing and removing
attachments.
1. Enter the utility vehicle. See page 16.
2. Start the engine.
3. Move the gear selector lever to Low.
4. Tilt the mounting frame (Item 1) of the utility vehicle
forward. Slowly drive forward until the front edge of the
attachment interface (Item 1) is completely under the top lip
of the attachment mounting frame (Item 2).
5. Raise the utility vehicle's attachment arm until the mounting
frame engages the attachment mounting frame and starts to
raise the attachment off the ground.
6. Tilt the attachment interface backward until the attachment is
slightly off the ground.
7. Move the gear selector lever to Park. Stop the engine and exit
the utility vehicle. See page 16.
8. Remove the two retainer pins (Item 3) and pins (Item 4) from
the storage location on the mounting frame.
OPERATION
2
1
3
4
3
4
17