Power Saving - TP-Link M7350 Quick Installation Manual

Charging Your M7350
Method 1
Via the Power Adapter
*
The M7350 has been fully charged when the lighting symbol (
Power Saving Mode
For power saving, you may encounter the two situations below:
1. The screen will turn off automatically after 15 seconds.
2. The WiFi connection will turn off automatically if no WiFi devices connect to the M7350 for 15 minutes.
You can simply tap the button or MENU button to recover.
Please refer to the User Guide to modify the Wi-Fi Auto-disable Time setting.
Screen Display
1 2
Restoring to Factory Defaults Settings
Method 1
On your PC, log into the web-management page, go to "Advanced->Device->Factory Defaults", and click Restore .
Method 2
Press and hold the Reset button for about 5 seconds until the screen appears "Reboot".
*Once the M7350 is restored, all the current configurations will be lost and you may need to reconfigure it.
Important Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble or modify the device.
Do not use damaged power adapter or USB cables to charge the device.
Do not use any chargers other than those recommended.
Do not use the device where wireless devices are not allowed.
*
Please follow the above instructions when operating the device. We cannot guarantee that no
accidents or damage will take place due to improper use of the device. Please use with care and
operate at your own risk.
(Recommend)
) of battery icon disappeared.
Network Type and Signal Strength
Internet Connection
Data Roaming
Hold
5 S
Method 2
Via Computer USB
WiFi Status and User Numbers
1
Messages
2
Battery Meter
Reboot
For More Information
For more information, please visit our website:

Power Saving

Download Speed
Upload Speed
Cumulative Traffic Usage
http://www.tp-link.com