Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha 40V Owner's Manual

EMU32724
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
ZMU03358
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
"
board motor could fall back down
suddenly if oil in the power trim and
tilt unit or in the power tilt unit loses
pressure.
the tilt support lever or knob when
trailering the boat. The outboard mo-
UP
UP
DN
NOTICE: Do not use
[EWM00262]
Operation
ZMU01935
UP
ZMU04993
61