Removing the palm rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-
touch screen display.
1
Remove the battery.
2
Follow the procedure from step 1 to step 3 in
drive".
3
Remove the keyboard.
4
Follow the procedure from step 1 to step 5 in
5
Follow the procedure from step 1 to step 3 in
6
Remove the
7
Remove the
8
Remove the
9
Remove the speakers.
10 Remove the
11 Remove the
12 Remove the
13 Remove the
14 Remove the
15 Remove the
Procedure
After performing the prerequisites, we are left with the palm rest.
computer. After working inside your
memory
module.
wireless
card.
power-button
board.
I/O
board.
heat
sink.
system
board.
touch
pad.
power-adapter
port.
display
assembly.
After working inside your
"Removing the optical
"Removing the base
"Removing the hard
cover".
drive".
93