Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 15 3000 Series Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the display assembly on the palm-rest assembly.
2 Close the display hinges and align the screw holes on the display hinges
with the screw holes on the palm-rest assembly.
3 Replace the screws that secure the display hinges to the palm-rest
assembly.
4 Route the display cable through its routing guides on the palm-rest
assembly.
5 Route the antenna cables through its routing guides on the palm-rest
assembly.
6 Close the display and turn the computer over.

Post-requisites

1 Replace the system
2 Replace the heat
3 Replace the I/O
4 Replace the wireless
5 Replace the memory
6 Follow the procedure from step 4 to step 6 in
7 Follow the procedure from step 3 to step 7 in
8 Follow the procedures from step 4 to step 5 in
drive".
9 Replace the keyboard.
10 Replace the battery.
computer. After working inside your
board.
sink.
board.
card.
module.
After working inside your
"Replacing the hard
"Replacing the base
"Replacing the optical
drive".
cover".
79