Advanced Security - TP-Link TL-WR720N User Manual

for the Router's password. After successfully entering the username and password, you will
be able to access the Router's web-based utility.
2. Be sure to change the Router's default password to a very secure password.
4.9.7

Advanced Security

Using Advanced Security page, you can protect the router from being attacked by TCP-SYN
Flood, UDP Flood and ICMP-Flood from LAN.
Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value between 5 and

60 seconds in the pull-down list. The Packets Statistic interval value indicates the time
section of the packets statistic. The result of the statistic used for analysis by SYN Flood,
UDP Flood and ICMP-Flood.
DoS Protection - Enable or Disable the DoS protection function. Only when it is enabled,

will the flood filters be effective.
Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack

Filtering.
ICMP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value

between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets numbers is beyond the
set value, the router will start up the blocking function immediately.
Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

UDP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value

between 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers is beyond the
set value, the router will start up the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN- FLOOD

Attack Filtering.
TL-WR841N 300Mbps Wireless N Router
-56-