TP-Link TL-WR720N User Manual page 32

Time-based Connecting - The connection will only be established in the period from the

start time to the end time (both are in HH:MM format).

Note:
Only when you have configured the system time on System Tools -> Time Settings page,
will the Time-based Connecting function can take effect.
Connect Manually - You can click the Connect/ Disconnect button to connect/disconnect

immediately. This mode also supports the Max Idle Time function as Connect on Demand
mode. The Internet connection can be disconnected automatically after a specified inactivity
period and re-established when you attempt to access the Internet again.
Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time, since some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click the Advanced button, and the
following page will then appear:
MTU Size - The default MTU size is "1480" bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name, which

should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the

Router during login, please click "Use IP address specified by ISP" check box and enter the
IP address provided by your ISP in dotted-decimal notation.
TL-WR841N 300Mbps Wireless N Router
-22-