Appendix C:troubleshooting; Maintaining Optimal System Performance; 138 Troubleshooting - Sharp AR-C360P Printing Manual

C

138 Troubleshooting

Appendix C:
Troubleshooting
This appendix provides troubleshooting tips.

Maintaining optimal system performance

Beyond the routine requirements of servicing and maintaining the
Sharp AR-C360P and replenishing consumables, you can improve
the overall performance of your system by doing the following:
• Check job ticket information carefully before printing.
Print jobs with the same output and paper specifications together, to
minimize paper changes. Also, print routine jobs while you prepare to
print jobs with special instructions or special media.
• Reduce unnecessary server connections to Command
WorkStation/Command WorkStation LE.
If you use a second or third Fiery on an occasional basis, you can
improve performance by logging off when those systems are not in use.
• Avoid printing with the Fiery "Disk full" warning.
If you see this warning, delete jobs that are not likely to be reused.
Avoid this condition by deleting old jobs on a regular basis. The date
associated with a job is the original date it was sent.
Troubleshooting
This section provides troubleshooting guidelines. If you are unable
to resolve a problem after referring to this section, contact your
site operator or administrator. Also, make sure there are no
applications installed on the Fiery, with the exception of the Fiery
utilities from the User Software CD. Applications other than the
Fiery utilities are not supported and can cause system problems.
Sharp AR-C360P EFI Printing Guide - 138