Sharp AR-C360P Printing Manual page 141

C
141 Troubleshooting
If this happens
You get poor printing
results.
The registration or color
of an image are not what
you expected.
Your printed file appears
too dark.
Color file prints in black
and white.
Desktop Color
Separations (DCS) format
images print incorrectly.
QuickDraw fill patterns
print as solids.
• Check if your application requires one of the Fiery's printer
description files.
Your application may require the Fiery PPD. If you print from Adobe
PageMaker, make sure the Fiery PPD is installed correctly. For information
about installing this file, see the
• Make sure the system has been calibrated.
For instructions, see Chapter 2 of the
• Ask the operator to print a Test Page with the printer.
The problem may be with the printer. If your Test Page shows that the
printer is working properly, correct the problem within your application. If
the Test Page is wrong, your printer may need to be adjusted.
• Adjust the Brightness option.
You can use the Brightness option when printing from an application or
from Fiery Downloader to lighten your image whenever you print a
PostScript or Encapsulated PostScript (EPS) file.
• In the Color Matching dialog box, make sure that Color/Grayscale,
or ColorSync Color Matching or PostScript Color Matching is
selected (not Black and White).
• Make sure the Color Mode print option is set to an option other
than Grayscale.
• Make sure you selected the correct options to send separations in
the application's Print dialog box.
• Make sure you have the file for every layer of separation that you
are printing.
• Set the Combine Separations option to On.
This combines the high-resolution files for an image and prints them. With
Combine Separations Off, the low-resolution master file will print.
• Use the Adobe PostScript Printer driver (or the Apple LaserWriter
8.3 or later printer driver).
Sharp AR-C360P EFI Printing Guide - 141
Try this
User Software Installation
Color Guide.
Guide.