Table of Contents
Advertisement
Using the Mode Dial
INFORMATION
Turn the front e-dial while pressing the
Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [EV Steps] in the [CUSTOM1
MENU] menu. (p.133)
You can automatically correct the sensitivity if appropriate exposure cannot be set with the set
criteria. Set [ISO Sensitivity] to [Auto] in the Fn menu. (p.82)
Set the aperture to the A position while holding down the auto-
lock button when using a lens with an aperture ring.
Exposure Warning
If the subject is too bright or too dark, the shutter speed will
blink in the viewfinder and on the LCD panel. If the subject is
too bright, set the aperture smaller (larger number), and when
too dark, open the aperture further (smaller number). Once blinking stops, you can take the picture.
Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.
Downloaded From camera-usermanual.com Samsung Manuals
180
button to change the EV Compensation value.
Advertisement
Table of Contents
