Table of Contents
Advertisement
Printing Using PictBridge
This function lets you print images directly from the camera without using a PC (direct printing).
Connect the camera and PictBridge compatible printer with the included USB cable to print directly.
After connecting the camera to the printer, select the images you want to print, the number of copies
and whether to insert the date or not.
Direct printing is performed in the following steps.
Set [USB] on camera to [Printer]
Connect the camera to the printer (p.110)
Set the printing options
Print single images (p.111)
Print all images (p.113)
Print with DPOF settings (p.115)
INFORMATION
Use of the AC adapter (SAC-82, optional) is recommended when connecting the camera to a
printer. If the AC adapter is not used, the printer may not work properly or the image data may be
lost if the batteries run out of power while the camera is connected to the printer.
Do not disconnect the USB cable during data transfer.
Depending on the type of printer, not all the settings made on the camera (such as print settings
and DPOF settings) may be valid.
A printing error may occur if the selected number of copies exceeds 500.
You cannot use the camera to select multiple images for printing on a single sheet.
Make the settings on the printer. For details, refer to the operating manual for your printer.
RAW images cannot be printed directly. Use a PC to print RAW images.
See the software instructions when connecting to a PC. (p.222)
Downloaded From camera-usermanual.com Samsung Manuals
108
SETUP MENU
Video Out
USB
Computer
Auto Power Off
Printer
Folder Name
Sensor Cleaning
Dust Removal
Reset
: Set
: Cancel
Advertisement
Table of Contents
