Making A Connection To A Wap Service - Nokia 5510 User Manual

Making a connection to a WAP service

First, activate the settings of the WAP service that you want to use.
If you want to use the same WAP service as the last time, you do not need to activate its settings again.
To activate the settings:
1. In the Services menu, scroll to
2. Scroll to Connection settings
3. Scroll to the appropriate setting set and press
4. Scroll to Activate and press
Next, make a connection to the WAP service. Do one of the following:
• Open the homepage of the WAP service: In the
(Select). OR
• Start the connection in standby mode: When you have not typed in any characters on the display,
press and hold the number key 0. OR
• Select a bookmark of the WAP service: In the
(Select). Scroll to the desired bookmark and press
(Select).
Make sure that the currently active set of connection settings can be used with the WAP page to
which the bookmark refers. If the bookmark does not work (in this case
be displayed), change the set of connection settings and try again. OR
• Enter the address of the WAP service: In the
(Select). Type in the address (press the Chr key for special characters) of the WAP service and press
(OK).
Settings and press
and press (Select).
(Select).
Services
Services
Services
©2002 Nokia Corporation. All rights reserved.
(Select).
(Options).
menu, scroll to Home
menu, scroll to Bookmarks
(Options). Scroll to
Check service settings
menu, scroll to Go to address
and press
and press
Go to and press
may
and press
75