Bosch PKP 3,6 LI Original Instructions Manual page 10

OBJ_BUCH-1683-002.book Page 10 Wednesday, June 18, 2014 2:28 PM
10 | English
Product Description and Specifica-
tions
Intended Use
The glue gun is intended for solvent-free bonding of e. g., pa-
per, cardboard, cork, wood, leather, textiles, foam, plastics,
(except PE, PP, PTFE, Styropor® and soft PVC), ceramics,
porcelain, metal, glass and stone.
Product Features
The numbering of the product features refers to the illustra-
tion of the glue gun on the graphics pages.
1 Nozzle
2 Silicone cap
3 Feed trigger
4 Glue stick*
5 Glue stick opening
6 Heating indicator
7 On/Off button
8 Battery charge-control indicator
9 Plug connector for charger
10 Socket for charge connector
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Glue Gun
Article number
Heating time
Gluing temperature
Glue stick, diameter
Glue stick, length
Weight according to
EPTA-Procedure 01/2003
Battery
Rated voltage
Capacity
Number of battery cells
Operating duration per
battery charge (according to
Bosch testing procedures)
Battery Charger
Article number
Charging time
Output voltage
Charging current
Allowable charging
temperature range
Weight according to
EPTA-Procedure 01/2003
Protection class
1 609 92A 0PE | (18.6.14)
Assembly
Battery Charging (see figure A)
 Observe the mains voltage! The voltage of the power
The battery is supplied partially charged.
To ensure full battery capacity, completely charge the battery
(at least 2–3 hours) before using for the first time.
The glue gun cannot be used during the charging procedure; it
is not defective, when it does not function during the charging
procedure.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium ion
battery against deep discharging. When the battery is dis-
charged, the glue gun is switched off by a protective circuit:
The glue is no longer heated.
PKP 3,6 LI
3 603 B64 6..
s approx. 15
 Flashing  Continuous light
°C approx. 170
– Plug the mains plug of the battery charger into the socket
mm Ø 7
mm 150
Disconnect the battery charger from the mains supply when
not using it for longer periods.
kg 0.3
 Protect the battery charger against moisture!
Li-Ion
Observe the notes for disposal.
V= 3.6
Ah 1.5
1
min approx. 30
(corresponds with
approx. 6 glue sticks)
2 609 120 4..
h 3.0–4.0
V= 5
mA 500
°C +5 ... +40
kg 0.1
/II
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Battery Charge Indicator
red green Meaning

– The battery is being charged

– The battery is fully charged
The battery has less than

– 30% of its capacity and
should be charged
The battery is completely

–
discharged
outlet and the charger plug 9 into socket 10.
Bosch Power Tools