Configuration - Nokia 5300 User Manual

S e t t i n g s
Select Menu > Settings > Enhancements. Select an enhancement, and
depending on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Incoming call alert
is off.
Lights — to set the lights permanently On. Select
for 15 seconds after a key press.
TTY/TDD > Use TTY > Yes — to use the text phone settings instead of headset or
loopset settings

■ Configuration

You can configure your phone with settings that are required for certain services
to function correctly. Your service provider may also send you these settings. See
"Configuration settings service," p. 10.
Select Menu > Settings > Configuration
Default config. sett. — to view the service providers saved in the phone. To set the
configuration settings of the service provider as default settings, select
Set as default.
Activ. def. in all apps. — to activate the default configuration settings for
supported applications
Preferred access pt. — to view the saved access points. Scroll to an access point,
and select Options > Details to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up number.
Connect to support — to download the configuration settings from your service
provider
Device manager sett. — to allow or prevent the phone from receiving phone
software updates. This option may not be available, depending on your phone.
See "Phone software updates," p. 50.
Personal config. sett. — to add new personal accounts for various services
manually and to activate or delete them. To add a new personal account if you
have not added any, select Add new; otherwise, select
the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select
48
is set to Beep once or Off, automatic answer
Automatic to set the lights on
and from the following options:
Options > Add
Options > Delete or Activate.
Options >
new. Select