Hide thumbs Also See for 5200:

Advertisement

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47
SERVICE MANUAL
Level &2
RM-74
RM-8
Page

(46)
CONFIDENTIAL
RM-46
Transceiver characteristics:
Band:
- RM-46/RM-74: Tri-band phone for EGSM 900/1800/1900MHz
- RM-47/RM-8: Tri-band phone for GSM 850/1800/1900MHz
Camera:
- RM-46/RM-47: 1.3 Megapixel camera with 8x digital zoom
- RM-74/RM-8: VGA resolution
Display:
- RM-46/RM-47: QVGA TFT color display resolution
- RM-74/RM-8: CSTN color display 160x128, 256.644 colors
Bluetooth
IRDA
FM radio
Connector: Mini USB Connector
Memory Card: miniSD™
Transceiver with BL-5B Li-Ion battery pack
Talk time
up to 3.2h
Environmental characteristics:
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
RM-47
320x240, 256.644 colors
Standby
Depends on network
up to 9.3days
Lead-free soldered
Approved 4.0
MGR
24.Sept.2007
Note
parameters

Advertisement

Table of Contents
loading

Summary of Contents for Nokia 5200

  • Page 1 Bluetooth IRDA FM radio Connector: Mini USB Connector Memory Card: miniSD™ Transceiver with BL-5B Li-Ion battery pack Talk time Standby Note Depends on network up to 3.2h up to 9.3days parameters Environmental characteristics: • Lead-free soldered Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 2: Table Of Contents

    QUICK TROUBLE SHOOTER - CAMERA CHANGE HISTORY Status Version No. Date Comments Draft 18.Jun.2006 Initial draft Approved 18.Sept.2006 Approval Approved 15.Mrz.2007 Exploded view updated (I014 added to 5300 only); Spare Parts over- view/ General Recycling Recommendation added; Battery Test and GONOGO TEST removed Approved 12.Sept.2007 Exploded view & Spare Parts overview updated Approved 24.Sept.2007 Exploded view & Spare Parts overview updated Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 3: Introduction

    Warnings and Cautions Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including impor- tant safety information. Note also the following: Warnings: CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHI- CLE ELECTRONIC SYSTEMS TO RF ENERGY. THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES, EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTUR- ER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE. Cautions: 1. Servicing and alignment must be undertaken by qualified personnel only. 2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn. 3. Use only approved components as specified in the parts list. 4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment. 5. Ensure all cables and wires are repositioned correctly. Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore every Service Supplier has to take care of all precautions, which are mentioned in the service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD Protection Requirements in this Service Manual. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 4: Exploded View

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL EXPLODED VIEW See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 5: Spare Parts Overview

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL SPARE PARTS OVERVIEW Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 6: General Recycling Recommendation

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL GENERAL RECYCLING RECOMMENDATION Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 7: Level 2 Solder Components

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL LEVEL 2 SOLDER COMPONENTS Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 8: Service Devices

    FLS-5 incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, developed specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-5. Travel Charger AC-4 Small and lightweight charger for fast charging of your phone battery. Internal Battery BL-5B Inserted under the back cover, this Li-Ion battery provides power in a lightweight package. SS-83 Domesheet alignment tool. DKE-2 Service Cable to connect the PC with the mini USB connector. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 9 Multimedia Creation & Support CONFIDENTIAL SS-45 Camera removal tool. (5300 only) SS-88 Camera removal tool. (5200 only) RJ-09 Soldering Jig Lead-free Solder Wire Mandatory for lead-free products (Level 2 only). 0772040 NMP Standard Toolkit (V2) For more informations refer to the Service Bulletin (SB-011) on NOKIA Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on NOKIA Online. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 10: Sw-Update 0

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL SW-UPDATE Flash Concept – (Point of Sales) To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 11: Upper Block Disassembly Instruction

    Multimedia Creation & Support CONFIDENTIAL UPPER BLOCK DISASSEMBLY INSTRUCTION 1. Needed tools: The SS-93, the dental pick, metal tweezers, a 2. Always cover the windows with a protective film. bit holder with a Torx Plus size 6 bit, a torque driver, and a DC plug. 3. Open the E-COVER Assembly. Remove the battery if it is still 4. Use the SRT-6 to pry open the A-COVER assembly. inserted. 5. Use the SRT-6 only in direction shown. Do not shift the SRT-6 6. Lift up the A-COVER Assembly. along the side where the keys are located Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 12 Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 7. The A-COVER DECORATION can now pushed out without the 8. Cover the window from inner side with a protective film. risk of damaging the A-COVER. 9. Release and remove the FUNCTIONAL KEYMAT.. 10. Ease out the MICROPHONE with the dental pic. 11. Unscrew the four screws in the order shown. 12. Remove all screws and discard them. Do not use them again. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 13 Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 13. Carefully unlock both latches. 14. Lift up the UI SHIELD assembly. 15. Cover the LCD Module with a protective film. 16. Nokia 5200 add-ons 17. After removing the screws carefully disconnect the LCD 18. Carefully lever out one LCD ADAPTER with the SS-93. MODULE connector with the SS-93. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 14 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 19. Now the LCD MODULE can be released from the UI SHIELD. 20. Lever out the EARPIECE. 21. Open the Flex Connector of the LCD MODULE. 22. Carefully lever up the TG UI MODULE. This will disconnect the hidden B to B connector. 23. To remove the SIDE FLEX both parts of the phone must be 24. Start removing the connector of the SIDE FLEX by lifting it up disassembled first. as shown first. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 15 Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 25. Then carefully shift it with the SS-93 as shown. 26. After disassembling the upper part the SIDE FLEX can be removed easily. 27. The disassembly of the upper part is now completed. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 16: Upper Block Assembly Instruction 6

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL UPPER BLOCK ASSEMBLY INSTRUCTION 1. Assembly 2. Place the SIDE FLEX into its compartment. 3. Now close the slide mechanism. 4. Push the connector into position shown. 5. Place the UI MODULE exactly as shown. 6. Check the positioning of the connector before continue. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 17 Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 8. Check the position of the UI MODULE again. 7. Push down the UI MODULE while opening the slide mechanism. 9. Now close the hidden connector. 10. Position the LCD MODULE and close the connector. 11. Insert the EARPIECE, always fit a new adhesive when 12. Push it down evenly. replacing the EARPIECE. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 18 16. Peel up the protection film from the LCD and place it into the UI SHIELD. 17. Insert the first LCD ADAPTER and push it into its place. 18. Mind the guide while pushing down evenly. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 19 Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 20. Insert the opposite LCD ADAPTER now. 19. Slightly shift down the LCD MODULE as shown. 21. Mind the guide and push it down evenly. 22. Now place the UI SHIELD over the assembly as shown. 23. Mind the guides. 24. Close the LCD Module connector. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 20 Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 25. Insert the screws. 26. Set the correct torque. 27. Apply the torque to all screws in the order shown. 28. Insert the MICROPHONE. 29. Note that the spring contacts are very delicate and can be 30. Fit the FUNCTIONAL KEYMAT. bent easily. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 21 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 31. Click the snaps into their places. 32. Do not forget removing the protective film before continue. 33. Align the A-COVER assembly and push it down evenly. Click 34. Check the window for cleanness. all snaps into their places. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 22: Lower Block Disassembly Instruction

    2. Always cover the windows with a protective film. tweezers, a straight bladed screwdriver, a bitholder with a Torx plus size 6 bit, a torque driver, and a DC plug. 3. Unlock and remove the E-COVER. Remove the battery if it is 4. Unscrew the torx plus size 6 screws in the order shown. still inserted. 5. Remove all screws and discard them. Do not use them 6. Before removing the LABEL COVER, open the SIM flip first... again. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 23 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 7. …then lever out the whole LABEL COVER. Never mismatch 8. Carefully unlock the latches of the C-COVER on both sides. Do not bent the Shielding Lids. this part with other engine modules. 9. Shift the C-COVER in direction shown and remove it. 10. Do not touch the lens of the CAMERA while removing the CAMERA GASKET. 11. Use the SS-45 Camera removal tool to unlock the clips 12. Carefully release the POWER KEY. of the housing of the CAMERA. Use the SS-88 for the smaller CAMERA of the 5200. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 24 Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 13. Lever out the DC JACK with the DC Plug. 14. Lift up the ENGINE MODULE, but bear in mind that the flex connector is still connected. 15. Carefully lever open the Flex connector. 16. Remove the NUMERIC KEYMAT. 17. The disassembly procedure is now completed. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 25: Lower Block Assembly Instruction

    Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL LOWER BLOCK ASSEMBLY INSTRUCTION 1. Assembly 2. Insert the NUMERIC KEYMAT. 3. Connect the flex foil. 4. Position the ENGINE MODULE correctly. 5. Insert the CAMERA. Mind the correct positioning. Use the SS- 6. Carefully push it into its place. 88 for the smaller camera of the 5200. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 26 Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 7. Place the CAMERA GASKET. 8. When replacing the D-COVER assembly, the delivered LABEL COVER must be replaced with the original labeled one. Never deliver a Product without its Type Label. 9. Insert the DC JACK with the DC Plug. 10. Place the POWER KEY, mind the correct placement. 11. Insert the LABEL COVER, fitted with the original TYPE LABEL. 12. Click all snaps into their places. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 27 (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 13. Before continue,- bring all sidekey levers into the position 14. Place the assemblies together, click the snaps into their places. shown. 15. Check the functionality of all keys before going on. 16. Mind the correct positioning of this metal clips. 17. Insert the screws. 18. Set the correct torque. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 28 Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL 19. Apply the torque to all screws in the order shown. 20. Complete the assembly with the B-COVER. 21. At least check the functionality of the slide mechanism. Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 29: Legend For Quick Trouble Shooter

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL LEGEND FOR QUICK TROUBLE SHOOTER Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 30: Quick Trouble Shooter - Power

    (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - POWER 1.2 Battery Connector (X2070) 1.3 Power Key 1.4 Switch (S2403) Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 31: Quick Trouble Shooter - Charging

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - CHARGING 2.2 DC-Jack 2.5 Battery Connector (X2070) 2.3 ------ 3.4 Fuse (F2000) Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 32: Quick Trouble Shooter - No Service

    (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - NO SERVICE 3.2 D-Cover Assembly 3.3 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 33: Quick Trouble Shooter - Sim

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - SIM 4.2 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 34: Quick Trouble Shooter - Earpiece

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - EARPIECE 5.2 Earpiece 5.5 Slide Flex 5.3 1TG UI Module Assembly 5.6 Connector (X2402) 5.4 1TG UI Module Assembly Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 35: Quick Trouble Shooter - Ihf Speaker

    (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - IHF SPEAKER 6.2 D-Cover Assembly 6.3 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 36: Quick Trouble Shooter - Functional Keys

    CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - FUNCTIONAL KEYS 7.2 Functional Keymat 7.5 Slide Flex 7.3 Functional Domesheet 7.6 Connector (X2402) 7.4 1TG UI Module Assembly Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 37: Quick Trouble Shooter - Display

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - DISPLAY 8.2 LCD Module 8.5 Slide Flex 8.3 1TG UI Module Assembly 8.6 Connector (X2402) 8.4 1TG UI Module Assembly Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 38: Quick Trouble Shooter - Microphone

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - MICROPHONE 9.2 Microphone 9.5 Slide Flex 9.3 1TG UI Module Assembly 9.6 Connector (X2402) 9.4 1TG UI Module Assembly Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 39: Quick Trouble Shooter - Numeric Keymat

    (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - NUMERIC KEYMAT 10.2 Numeric Keymat 10.3 Numeric Domesheet Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 40: Quick Trouble Shooter - Sidekeys

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - SIDEKEYS 11.2 A-Cover Assembly 11.5 Slide Flex 11.3 1TG UI Module Assembly 11.6 Connector (X2402) 11.4 1TG UI Module Assembly Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 41: Quick Trouble Shooter - Volume Keys

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - VOLUME KEYS 12.2 E-Cover Assembly 12.3 D-Cover Assembly 12.4 Switchs (S2401 / S2402) Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 42: Quick Trouble Shooter - Camera Key

    Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - CAMERA KEY 13.2 E-Cover Assembly 13.3 D-Cover Assembly 13.4 Switch (S2404) Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 43: Quick Trouble Shooter - Headset

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - HEADSET 14.2 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 44: Quick Trouble Shooter - Mini Usb

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - MINI USB 15.2 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 45: Quick Trouble Shooter - Card Reader

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - CARD READER 16.2 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...
  • Page 46: Quick Trouble Shooter - Camera

    Page (46) Approved 4.0 CMO Operations & Logistics Training and Vendor Development 24.Sept.2007 Multimedia Creation & Support CONFIDENTIAL QUICK TROUBLE SHOOTER - CAMERA 17.2 Camera 17.3 ------ Copyright © 2006-2007 NOKIA Corporation. All rights reserved. Service Manual 5200 RM-74/RM-8 / 5300 RM-46/RM-47...

This manual is also suitable for:

5300Rm-174Rm-181Rm-146Rm-147

Table of Contents