Related Manuals for jcb JCB-AG720
Summary of Contents for jcb JCB-AG720
- Page 1 Safety and operating manual Angle Grinder JCB-AG720 JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 3: General Power Tool Safety Warnings
Do adapter plugs with grounded not use a power tool while you power tools. Unmodified plugs are tired or under the influence and matching outlets will reduce JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... - Page 4 Power away from moving parts. Loose tools are dangerous in the hands clothes, jewellery or long hair can of untrained users. be caught in moving parts. e) Maintain power tools. Check JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 5 If the replacement of the supply cord is necessary, this has to be done by the manufacturer or its agent in order to avoid a safety hazard. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 6: Safety Instructions For All Operations
The eye your power tool. Incorrectly sized protection must be capable of accessories cannot be adequately stopping flying debris generated JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... - Page 7 13. Do not run the power JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 8 4. Use special care when working exposed towards the operator. The JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 9 1. Do not “jam” the cut-off wheel the risk of wheel pinching and or apply excessive pressure. Do kickback. Large workpieces tend not attempt to make an excessive to sag under their own weight. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 10 1. Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment strings can JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 11 2002/96/CE. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 12: Component List
COMPONENT LIST JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... - Page 13 6. INNER FLANGE 7. SPINDLE 8. GRINDING DISC* 9. SPANNER 10. PROTECTION GUARD FOR GRINDING 11. CLAMPING LEVER 12. CODED PROJECTION 13. PROTECTION GUARD FOR CUTTING* *Not all accessories illustrated are included as standard. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 14: Technical Data
To use the correct accessory for the tool and ensure it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... - Page 15 Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 16: Intended Use
(See 1 ) Do not make any alterations to the auxiliary handle. Do not continue to use an auxiliary handle if it is damaged. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... - Page 17 (direction-of- rotation arrow on the machine head) agree. For mounting, see the Component list illustration page. Screw on the outer flange (5) and tighten with the two-pin spanner (9) (See 2 ). JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 18 (working position). To fasten the wheel guard (10), close the clamping lever (11). The closed side of the wheel guard (10) must always point to the operator. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 19 1. HAND GRIP AREAS Always hold your angle grinder firmly with both hands when operating (See 5 ). 2. ROUGH GRINDING The best roughing results are achieved when setting the machine JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 20 Before any work on the machine itself, pull the mains plug, and then remove the disc and guard. The gear case can be rotated with respect to the machine housing. In this manner, the On/Off switch can JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
- Page 21 If the gear case comes out of the housing the motor carbon brushes will need replacing. Screw in the screws again and tighten. (See 6 ) JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092...
-
Page 22: Working Hints For Your Angle Grinder
This is normal and will not damage your power tool. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... -
Page 23: Environmental Protection
13 Amp fuse approved to BS1362 Connect Brown L(live) Blue to N (neutral) Outer sleeve Cable grip firmly clamped JCB, SO53 3LE www.JCBDIY.com Customer Helpline 0333 0143092... -
Page 24: Warranty Statement
WARRANTY STATEMENT A product of hard work In every corner of the world you'll find a JCB machine. Since our beginnings in 1945, we have always invested heavily in research and development, keeping JCB at the cutting edge of innovation. Today, JCB has some of the finest engineering facilities across the globe, producing a range of over 300 machines and maintains a reputation for unrivaled customer service. -
Page 25: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product Description JCB Angle Grinder Type (JCB-AG720) Function Peripheral and lateral grinding Complies with the following Directives, EC Machinery Directive 2006/42/EC...