Precaution; Setting The Switch; Order Of Adjustments; Subjects - Sony DCR-PC110 Service Manual

1-1-3.

Precaution

1. Setting the Switch

Unless otherwise specified, set the switches as follows and perform
adjustments without loading cassette.
1. POWER switch (PS-30550 block) ......................... CAMERA
2. NIGHT SHOT switch (Lens block) ................................. OFF
3. DEMO MODE (Menu setting) ........................................ OFF
4. DIGITAL ZOOM (Menu setting) .................................... OFF
5. STEADY SHOT (Menu setting) ...................................... OFF
6. PROGRAM AE (Menu setting) ................................... AUTO
7. WHITE BALANCE (Menu setting) ............................ AUTO

2. Order of Adjustments

Basically carry out adjustments in the order given.
Color bar chart (Color reproduction adjustment frame )
H
A B
A=B
Fig. a
(Video output terminal
output waveform)

3. Subjects

1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 5-1-4. (Color reproduction
adjustment frame)
2) Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)
3) Flange back adjustment chart
Make the chart shown in Fig. 5-1-5 using A0 size (1189mm ×
841mm) black and white vellum paper.
C=D
C
V
A
B
Enlargement
Difference in level
A
B
Fig.5-1-4.
8. 16 : 9 WIDE (Menu setting) ............................................ OFF
9. PICTURE EFFECT (Menu setting) ................................. OFF
10. DISPLAY (Menu setting) .................................. V-OUT/LCD
11. DISPLAY (ME-30550 block) ........................................... ON
12. FOCUS switch (FK-30550 block) ........................ MANUAL
13. DIGITAL EFFECT (ME-30550 block) ........................... OFF
D
Fig. b (TV monitor picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.
Black
Note: Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.
5-7
Electronic beam scanning frame
CRT picture frame
White
841mm
1189mm
Fig. 5-1-5.