Lights; Send Own Number; System Selection - Nokia 5190 Owner's Manual

Lights

If you're using your phone with a car kit, use 0HQX 4 3 7 to
set your phone's lights to 2Q (lights stay on) or $XWRPDWLF
(after 15 seconds, lights turn off until the next key is
pressed, phone rings, etc.).
For information about turning your phone's lights on at any
time, see page 9.

Send own number

Use 0HQX 4 1 3 to access this network service, which allows
you to display your phone number to the person you are
calling. This feature is only effective when calling a number
that is equipped with Caller ID.
3UHVHW uses the default network setting (on or off). Contact
your service provider to find out what the default is.
2Q displays your number to people you call.
2II prevents your number from being shown to people you
call.

System selection

Use 0HQX 4 3 5 to tell your phone how to choose a PCS
system (network) if more than one is available. Your
selection remains active until you change it or change the
SIM card.
If you choose $XWRPDWLF , the phone automatically selects an
available system. The phone beeps when it switches to a
different system.
If you choose 0DQXDO , the phone searches for and displays
available systems. Scroll to the one you want, then press
6HOHFW . The phone requests registration and displays the
result. If you lose connection while in Manual mode, the
phone prompts you to select a system again.
For information on analog system selection, see 'Analog
system selection' on page 65.
19