Borderless Printing; Date Print; Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings - Brother MFC-J615W Advanced User's Manual

Chapter 8

Borderless printing

This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to choose Borderless.
b
Press d or c to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.

Date Print

You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn't
have the date information, you cannot use
this function.
a
Press a or b to choose Date Print.
b
Press d or c to choose On (or Off).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Note
• The DPOF setting on your camera must
be turned off to use the Date Print feature.
• This function is not available for AVI or
MOV movie file formats.
46
Setting your changes as a
8
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
8
a or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless,
and Date Print, that you have changed, to
the factory settings.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
8
8