Table of Contents
Advertisement
C o n t a c t s
When the voice tag is successfully saved, a beep sounds, and
number with a voice tag in Contacts.
Managing voice tags
You can check, edit, or delete the saved voice tags.
Press Menu, and select
Contacts
Making calls with voice tags
If the phone has an application running that is sending or receiving data using the (E)GPRS connection, you must end the
application before using voice tags.
1. In standby mode, press and hold the volume-down key, or press and hold the selection key
heard,
Speak now
is displayed.
2. Speak the voice tag clearly. The phone plays the voice tag if it is recognized, and dials the phone number of the voice tag
after 1.5 seconds.
If you are using a compatible headset with a headset key, press and hold the headset key to start voice dialing.
Info numbers and service numbers
Your service provider may have included information numbers or service numbers in your SIM card.
Press Menu, and select Contacts,
a service number, and press
My numbers
The phone numbers assigned to your SIM card are saved in
press Menu, and select
Contacts
Caller groups
You can arrange the names and phone numbers saved in
example, the phone to sound a specific ringing tone, and show a selected graphic on the display when you receive a call
from a phone number in the group.
Press Menu, and select
Contacts
You can select from the following options:
•
Group
name — Key in a new name for the caller group, and press OK.
•
Group ringing
tone — Select the ringing tone for the group.
profile.
•
Group
logo — Select
On
•
Group
members — Press
press Add.
To remove a name from a caller group, scroll to the name that you want to remove, press Options, and select
contact.
Copyright © 2004 Nokia. All Rights Reserved.
→
Voice
tags. Select the contact with the voice tag that you want to hear, change, or delete.
Info
numbers, or
Service
to call the number.
→
My
numbers. Scroll to the desired name or number, and press View.
See Tone settings on page 37.
→
Caller groups
and the desired caller group.
to set the phone to display the group logo,
Add
to add a name to the caller group. Scroll to the name that you want to add to the group, and
Voice tag saved
is displayed.
numbers. Scroll through a category to an information number, or to
My numbers
if this is allowed by the card. To view the numbers,
Contacts
into caller groups. For each caller group, you can set, for
Default
is the ringing tone selected for the currently active
Off
not to display it, or
35
appears after the phone
. After a short tone is
View
to view the logo.
Remove
Advertisement
Table of Contents
