Table of Contents
Advertisement
G e t t i n g s t a r t e d
The alarm clock is set to On.
The countdown timer is running.
The stopwatch is running.
The GPRS connection mode
EGPRS is the same.
An (E)GPRS connection is established.
The (E)GPRS connection is suspended (on hold), for example, if there is an active call during an (E)GPRS dial-up connection.
When the infrared connection is activated, the indicator is shown continuously.
If you have two phone lines, the second phone line is indicated.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected to the phone.
Calls are limited to a closed user group.
,
,
A headset, handsfree, or loopset is connected to the phone.
The timed profile is selected.
or
Push to talk connection is active or suspended.
Access codes
Security code
The security code (5 to 10 digits) protects your phone against unauthorized use. The pre-set code is 12345. Change the code,
and keep the new code confidential and in a safe place separate from your phone. You can set whether the phone requests
the code.
See Security settings on page
If you key in an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5
minutes and key in the code again.
PIN and PIN2 codes (4 to 8 digits), module PIN, and signing PIN
• The personal identification number (PIN) code protects your SIM card against unauthorized use. The PIN code is usually
supplied with the SIM card. Set the phone to request the PIN code each time the phone is switched on.
settings on page 40.
• The PIN2 code may be supplied with the SIM card and is required to access some functions.
• The module PIN is required to access the information in the security
PIN is supplied with the SIM card if the SIM card has a security module in it.
• The signing PIN is required for the digital signature.
the SIM card if the SIM card has a security module in it.
If you key in an incorrect PIN code three times in succession, the phone may display
code blocked, for example, and ask you to enter the PUK code.
PUK and PUK2 codes (8 digits)
The personal unblocking key (PUK) code is required to change a blocked PIN code. The PUK2 code is required to change a
blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your local service provider for the codes.
Barring password (4 digits)
The barring password is required when using the
password from your service provider.
Wallet code (4 to 10 digits)
The wallet code is required to access wallet services. If you key in an incorrect wallet code three times, the wallet application
is blocked for 5 minutes. After the next three incorrect attempts, the length of time for which the application is blocked will
be doubled.
See Wallet on page 50.
Copyright © 2004 Nokia. All Rights Reserved.
Always online
is selected and the (E)GPRS service is available. The indicator for GPRS and
40..
See Digital signatures on page 60.
Call barring
module.See Security module on page 59.
service.
See Security settings on page 40.
10
See Security
The signing PIN is supplied with
PIN blocked
or
PIN code blocked
You can obtain the
The module
PIN
Advertisement
Table of Contents
