Ptt Settings - Nokia 5070 Owner's Manual

■ PTT settings

There are two kinds of PTT settings: settings for connecting to the service and settings for use.
You may receive the settings for connecting to the service from your service provider. See
settings service p. 14. You can enter the settings manually. See
To select the settings for connecting to the service, select
following options:
Configuration — to select a service provider, Default, or
that support the PTT service are shown.
Account — to select a PTT service account contained in the active configuration settings
You can also select from the following options:
Server address
To edit the PTT settings for use, select
1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-one calls
1 to 1 calls > Off — to make but not receive one-to-one calls. The service provider may offer some services that
override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone,
select Notify.
Listened groups > On — to activate the listened channels
PTT status in startup >
phone on
Send my PTT address >
Menu >
Yes — to set the phone to automatically connect to the PTT service when you switch the
No — to hide your PTT address from channel and one-to-one calls
Copyright © 2006 Nokia. All rights reserved.
Configuration
Menu > Push to talk
Personal config.
PTT user name, Default
Push to talk > PTT settings
Configuration
p. 64.
> Config. settings
for PTT service. Only the configurations
nickname, PTT password, Domain, and
and from the following:
and from the
87