Tones; My Shortcuts; Display - Nokia 5070 Owner's Manual

■ Tones

You can change the settings of the selected active profile.
Select Menu > Settings
Vibrating alert, Push to talk
Warning tones. You can find the same settings in the
If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.
To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select
for. Scroll to the caller group you want or

■ My shortcuts

With personal shortcuts, you get quick access to often used functions of the phone. To manage the shortcuts,
select Menu > Settings
Right selection key — to select a function from the list for the right selection key. See also
This menu may not be shown, depending on your service provider.
Navigation key — to select shortcut functions for the navigation key. Scroll to the desired navigation key, select
Change and a function from the list. To remove a shortcut function from the key, select (empty). To reassign a
function for the key, select Assign. This menu may not be shown, depending on your service provider.
Voice commands — to activate phone functions by saying a voice tag. Select a folder, scroll to a function to
which you want to add a voice tag, and select Add.
Make a call with a voice tag

■ Display

Select Menu > Settings
Wallpaper — to add the background image to the display in the standby mode. To activate or deactivate the
wallpaper, select On or Off. Select
> Tones. Select and change
settings, Message alert
All calls, and select Mark.
> My shortcuts and from the following options:
p. 54.
> Display and from the following options:
Select wallpaper
Copyright © 2006 Nokia. All rights reserved.
Incoming call alert, Ringing
tone, Instant message alert
Profiles menu. See Profiles
indicates a voice tag. To activate a voice command, see
to select an image from the
tone, Ringing volume,
tone, Keypad tones, and
p. 57.
Standby mode
Gallery or Select slide set
Alert
p. 21.
and a
58