Dell P4317Q User Manual page 43

OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell P4317Q
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 3840 x 2160.
Before the DDC/CI function is disabled, the following message is displayed:
Dell P4317Q
When the monitor enters the Power Save Mode, the following message appears:
Dell P4317Q
Entering Power Save Mode.
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell P4317Q
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
Monitor specifications
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
? No VGA signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
3840x2160, 60Hz
or any other monitor
for the horizontal and vertical
No
Yes
Operating your monitor
43
|