Guest Network; Wireless Settings - TP-Link TL-WR841HP User Manual

Allow Guest To Access My Local Network - If enabled, guests can communicate with

hosts.
Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth

Control rules will take effect.
Egress Bandwidth For Guest Network - The upload speed through the WAN port for Guest

Network.
Ingress Bandwidth For Guest Network - The download speed through the WAN port for


Guest Network.

Guest Network - Enabled or disable the Guest Network function here.

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your Guest Network.
Wireless Security - You can configure the security of Guest Network here.

Access Time - During this time the wireless stations could accessing the AP.


Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page "Bandwidth Control->Control Settings".
TL-WR841HP
Figure 4-26 Guest Network Wireless Settings
-46-
300Mbps High Power Wireless N Router