TP-Link TL-WR841HP User Manual page 44

Disable Security - If you do not want to use wireless security, select this check box, but it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2 – Personal (Recommended) - It's the WPA/WPA2 authentication type based

on pre-shared passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The
•
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the
encryption, you will find a notice in red as shown in Figure 4-18.
TL-WR841HP
Figure 4-17 Wireless Security
WPA/WPA2 – Personal (Recommended)
300Mbps High Power Wireless N Router
radio button and choose TKIP
-38-