Note: Charges may apply for certain types of received calls, such as roaming
and high speed data calls. Contact your GSM service provider for
more information.
Note: The phone expects the callback call to use the same data call settings
that were used in the callback-requesting call. The system must
support this type of call in both directions, to and from the phone.
•
Callback type - The options are Use server no. / Use other no. Ask your
service provider for the correct setting; it will depend on the service
provider's configuration.
•
Callback number - Key in your phone's data phone number which the
dial back server uses. Usually, this number is the data call phone
number of your phone.
•
Use PPP compression - When set to Yes, this option speeds up the data
transfer, if supported by the remote PPP server. If you have problems
with establishing a connection, try setting this to No. Contact your
service provider for guidance.
Glossary: PPP (Point-to-Point Protocol) - a common networking
software protocol that enables any computer with a modem and
a phone line to connect directly to the Internet.
•
Use login script - The options are Yes / No.
•
Login script - Insert the login script.
•
Modem initialization (Modem initialization string)- Controls your phone
using modem AT commands. If required, enter characters specified by
your GSM system service provider or Internet service provider.
GPRS
Go to Menu→ Tools→ Settings→ Connection → GPRS.
The GPRS settings affect all access points using a packet data connection.
[ 39 ]
Settings
4