Access Points - Nokia 3600 User Manual

4
Edit an access point
When you open Access points, the list of already available access points
opens. Scroll to the access point you want to edit, and press
Delete an access point
In the list of access points, scroll to the access point you want to remove
and select Options→ Delete.

Access points

Options when editing access point settings are: Change, Advanced settings,
Help, and Exit.
Here you can see a short explanation for every setting that may be needed
for different data connections and access points.
Note: Enter the settings from the top because depending on what data
Note: Follow the instructions given to you by your service provider
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GSM data, High speed GSM, and GPRS.
Depending on what data connection you select, only certain setting
fields are available. Fill in all fields marked with Must be defined, or
marked with a red asterisk. Other fields can be left empty, unless you
have been instructed otherwise by your service provider.
Tip: See also "Settings needed for multimedia messaging" on page 78,
"Settings needed for e-mail" on page 81, and "Phone browser service
settings" on page 120.
Note: To use a data connection, the system service provider must
• Access point name (for packet data only) - The access point name is
needed to establish a connection to the GPRS system. You obtain the
access point name from your service provider.
connection you select (Data bearer) or whether you need to insert
a Gateway IP address, only certain setting fields are available.
very carefully.
support this feature, and if necessary, activate it for your SIM card.
[ 36 ]
.