Installing The Front Bezel - Dell Vostro 330 Owner's Manual

Installing The Front Bezel

1. Place the front bezel on the chassis.
2. Carefully route in the IR cable and camera cable out through the routing
slot.
3. Carefully route-in the Bluetooth cable through the routing slot.
4. Press the bezel till it snaps into the chassis.
5. Hold the assembly together and carefully turn it over.
6. Replace the screws that secure the front bezel to the chassis. The screws
are marked with an arrow.
7. Thread the IR cable and camera cable.
8. Route the bluetooth cable through the routing slot on the chassis.
processor
9. Replace the
processor heat sink .
10. Replace the
processor fan .
11. Replace the
video card fan .
12. Replace the
video card and heat sink assembly .
13. Replace the
system board shield .
14. Replace the
front stand .
15. Replace the
cover .
16. Replace the
17. Follow the procedures in
76
After Working Inside Your Computer .