Removing The Power-Switch Board; Installing The Power-Switch Board - Dell Vostro 5450 Owner's Manual

Removing the Power-Switch Board

1. Follow the procedures in
2. Remove:
a. stand
b. back cover
3. Perform the following:
a. Press the locking tab that secures the power-switch to the computer [1].
b. Lift the power-switch board to release it from the slot [2].
4. Lift the lock tab and disconnect the power-switch cable from the power-switch board [1.2].

Installing the Power-Switch Board

1. Connect the power-switch cable to the power-switch board.
2. Place the power-switch board into its slot on the computer.
3. Install:
Before Working Inside Your Computer.
15