Descaling - Whirlpool AMW 599 Installation And Quick Start Manual


Press the OK / Select button . (Oven now prepares for descaling)

Press the OK / Select button after placing the water container
with descaler in its place. Follow on screen guides. Do not inter-
rupt the process until it has finished.
The appliance has a system that indicates when oven descaling is nec-
essary. Carry out descaling when the message "Descale needed"
appears on the display. Before carrying out descaling,
make sure you have enough descaling liquid available.
We recommend that you use "Wpro active'clean" des-
caler suitable for coffee / espresso machines and ket-
tles.
Descaling lasts about ½ hour, during which no cook-
ing function can be activated. A message ("Please re-
move...") indicates the end of the operation.
After emptying the water container, no residue should
be present in the system, the appliance is properly descaled and
safe to use.
Note: Once started, the descaling procedure must always be com-
pleted.
Descaler amount
Mix 1 liter of water with all of the content in one full bottle (250 ml)
"Wpro active'clean" descaler. If "Wpro active'clean" descaler is un-
available, use only white vinegar.
22
SPECIALS

DESCALING

Drain
Descaling
Proving
 
For descaling the boiler
Empty and refill
container with descaler
1/3 00:32
PHASE PHASE TIME
Descaling
11:10
END TIME
Empty and refill
container with water
2/3 00:06
PHASE PHASE TIME
Rinsing
11:10
END TIME
Descale needed.
Press <OK> to descale, <back> to cancel
Please remove and empty the container
Press OK/Select button when done