Mounting The Appliance; Prior To Connecting; After Connecting - Whirlpool AMW 599 Installation And Quick Start Manual

MOUNTING THE APPLIANCE

Installing (mounting) of this appliance in places that are not per-
manent such as ships, caravans, busses and so on, may only be
carried out by a professional if it is ensured that the conditions
on the place permit a safe use of the appliance.

PRIOR TO CONNECTING

Check that the voltage on the rating plate corre-
sponds to the voltage in your home.
Ensure the oven cavity is empty before mount-
ing.
Ensure that the appliance is not damaged. Check
that the oven door closes firmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.

AFTER CONNECTING

The oven can be operated only if the oven door is
firmly closed.
The earthing of this appliance is compulsory. The
manufacturer will accept no responsibility for
injury to persons, animals or damage to ob-
jects arising from the non-observance of this
requirement.
6
IMPORTANT INFORMATION
The appliance shall only be used when it is
built-in (mounted) properly.
Follow the supplied separate mounting in-
structions when installing the appliance.
Do not operate this appliance if it has a damaged
mains cord or plug, if it is not working proper-
ly, or if it has been damaged or dropped. Do
not immerse the mains cord or plug in water.
Keep the cord away from hot surfaces. Electri-
cal shock, fire or other hazards may result.
Do not use extension cord:
The first time the oven is switched on, you will be
asked to set the language and current time.
Follow the instructions under the headline
"Changing settings" in this instructions for use.
The appliance is ready to use after these two
steps have been taken.
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.
If the power supply cord is too short, have
a qualified electrician or serviceman in-
stall an outlet near the appliance.