Changing Or Canceling Timer Settings (Timer List) - Sony RDR-GXD455 Operating Instructions Manual

If the timer settings of a Synchro-Recording
and another timer recording overlap
Regardless of whether or not the program is a
Synchro-Rec program, the program that starts first
has priority. The recorder starts recording the
second program about ten seconds after the first
program has finished. If the end time of one
setting and the start time of another timer setting is
the same, the beginning of the program that starts
later will be cut.
Changing or Canceling
Timer Settings (Timer List)
ICB
mm
~ IIm1III1D EI!I
You can change or cancel timer settings using the
Timer List menu.
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder's power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• During Synchro-Rec standby, the Auto Clock Set
function does not work (page 78).
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• If Synchro-Rec starts with the recorder turned on, the
recorder will tum off when the recording ends.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop after a few
seconds.
will be cut off
~
I
10:10AM
Ch Mode Edit
: ; " " - - 4 - -
t/.I+-I-+,
ENTER
End Start No Date
Oil})
Timer List
en RETURN
SYSTEM
MENU
Timer information displays the recording
date, time, recording mode, etc.
If there are more than six timer settings, press
f-
to display the next page.
4
Select the timer setting you want to change
or cancel, and press ENTER.
The sub-menu appears.
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "Timer," and press ENTER.
3
Select "Timer list," and press ENTER.
10:00 9:00
8:00 7:00
Program 1
Program 2
54