Table of Contents
Advertisement
M e n u f u n c t i o n s
•
Data
bearer. Select GPRS.
•
Bearer
settings, to edit the
following items:
•
GPRS access
the access point name to
establish a connection to a
GPRS network and press
OK. Contact your network
operator or service
provider for the access
point name.
•
IP
address. Enter the
address, press
and press OK. You obtain
the IP address from your
network operator or
service provider.
•
Authentication
Select
Secure
•
User
name. Enter the user
name and press OK.
• Password. Key in the
password and press OK.
•
Allow
adverts. You can allow or
reject advertisements. This
setting is not shown if the
multimedia reception
No.
To receive the multimedia
connection settings as a text
message
34
point. Enter
for a dot,
type.
or Normal.
Allow
is set to
Copyright © 2004 Nokia. All rights reserved.
You may be able to receive the
service settings as a text message
from the network operator or service
provider that offers the WAP service
that you want to use. For more
information, contact your network
operator or service provider.
Font size setting
To select the font size for reading
and writing messages, press Menu,
and select Messages,
settings,
Other settings
size.
Service commands
Press Menu, and select
and
Service
commands. Enter and
send service requests (also known as
USSD commands), such as activation
commands for network services, to
your service provider (network
service).
■ Call register
(Menu 2)
The phone registers the phone
numbers of missed, received and
dialled calls, and the approximate
length and cost of your calls.
The phone registers missed and
received calls only if the network
supports these functions, the phone
is switched on and within the
network's service area.
Message
and
Font
Messages
Advertisement
Table of Contents
