Ringing Volume (Menu 6); Nam Select (Menu 7) - Nokia 232N Owner's Manual

Ringing Volume (Menu 6)

This function allows you to select and demonstrate the
ringing volume level, or set it to off. You may select:
– RINGING LOW : Quiet ringing tone.
– RINGING HIGH : Loud ringing tone.
– SILENT SERVICE : No ringing tone; instead, when
an incoming call is received, only a short beep will
be heard, and the lights will flash. The message
SILENT will be displayed (when you are not entering
digits) to remind you that there will be no ringing
tone. All other tones (including keypress tones),
except warning tones, will be switched off.
To set ringing volume level:
Press MENU 6.
Press or to select the option you want.
Press STO to confirm the setting and hear a
sample of the volume level.
If the phone is connected to a car kit:
The options will be different; you may select one of five
volume levels (RINGING LEVEL 1, 2, 3, 4, 5) as well
as SILENT SERVICE (press
STO to confirm.

NAM Select (Menu 7)

The phone has a two-number capability which lets you
subscribe to competitive cellular services in your area
and other cities. Your phone can be programmed (by
your dealer) with up to two numbers; each is stored in
a NAM (Number Assignment Module).
This menu function allows you to select either of your
numbers (if two have been programmed).
NOTE: You cannot change from one network (number)
to the other during a call (if you do attempt to change
the network, the message CALL IN PROGRESS will
be displayed, and no action will result). If you are only
registered on one network you cannot access the other.
or to select) and
39