Table of Contents
Advertisement
REMINDER MESSAGE FACILITY
You may enter a message (a name and/or a number),
just before switching off the phone, and then have that
message recalled automatically when you next
switch on (e.g. to remind you to make a call).
When recalled, the reminder message is shown in
alpha mode if there is a text part, otherwise in number
mode. You may clear, edit or store the message, or
call the number, by switching to number mode (press
ABC if in alpha mode) and pressing SEND.
To enter and store a reminder message:
Enter the number or name on the display as
necessary (press ABC to switch between number
mode and name mode). Alternatively, you could
recall a number or name already stored.
Press MENU momentarily, then press and hold
ON. The phone switches off, and stores the
reminder message automatically.
When you next switch on the phone, the message will
be displayed (once); the message will then be erased
automatically from memory, and will not appear when
you switch on again.
DISPLAYING YOUR OWN NUMBER
Your own number, which is stored permanently in
memory location 99, is derived from NAM data which
has been programmed by your dealer (you cannot
change the number).
To recall your own number:
Press RCL 99.
If your phone is registered on two networks, the
number displayed will be that for the network currently
used (and relates to the currently-selected NAM); refer
to 'NAM Select (Menu 7)', page 39.
CHANGING THE WAKE-UP MESSAGE
The wake-up message is the message which is
displayed briefly when the phone is switched on
(the message relates to the currently-selected NAM).
The wake-up message is normally a name (i.e. text),
and it is stored in the alphanumeric part of memory
29
Advertisement
Table of Contents
